Quick Answer: How Much Does It Cost To Fix A Thermocouple?

Can you fix a thermocouple?

If the pilot remains lit, but the main furnace doesn’t stay lit, it’s time to replace the thermocouple.

Replacement thermocouples are in stock at most hardware and home improvement stores.

Because they come in different sizes, take your faulty thermocouple to the store with you so you can make a correct match..

Can a thermocouple work intermittently?

a safety device that has started to go bad, or has failed permanently. In this client’s case, the thermocouple was initially working intermittently, and then finally failed. … This allowed the gas to flow long enough to heat up the thermocouple and generate some electrical current flowing back to the gas valve.

Will a pilot stay lit with a bad thermocouple?

The job of the thermocouple is to keep the pilot lit. It does this by sending a tiny electric current to a sensor on the gas valve signaling the valve to stay open. … Nothing lasts forever, and when the thermocouple wears out, the pilot won’t stay lit and your appliance won’t work.

How do you check if a thermocouple is working?

Place one test lead on the side of the thermocouple and the other to the end that screws into the gas valve. If the thermocouple has proper continuity, a small resistance reading should be visible on the multimeter. Many multimeters also indicate continuity with an audio alert.

Can a thermocouple be cleaned?

The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.

What would cause a pilot light to keep going out?

Usually, a problem with the thermocouple causes the pilot light to go out. The thermocouple is the small copper rod that the pilot light hits. The thermocouple’s job is to shut a gas safety valve if the pilot light goes out. That’s important because gas is always being supplied to the pilot to keep the flame lit.

What happens when a thermocouple goes bad?

This means that if the thermocouple goes bad, there is no way of detecting if the pilot light is burning or not. And when the pilot light goes out, you will not have hot water supply in your plumbing system. To test if the problem is with the thermocouple, try to relight the pilot.

Can you replace a thermocouple yourself?

It’s easy to replace and a new one costs $5 to $10. Rather than trying to unfasten the thermocouple inside the water heater’s burning chamber, it’s easier to remove the whole burner and thermocouple assembly. … Then unfasten the three nuts that hold the thermocouple and the two gas tubes to the valve.

Can you bypass a thermocouple?

So if you want to bypass the thermocouple you have to get rid of the spring mechanism. You can bypass the spring mechanism by simply using a screwdriver to pop out the little e-clip and take the valve off and problem solved.

What does thermocouple look like?

The thermocouple looks like a piece of metal tubing smaller than a soda straw. To find it, first locate the gas control box. This is the box that the main gas line enters, where you turn the gas on in the furnace. (On most furnaces, it also houses the button that you hold open or push to relight the pilot.)

What’s the difference between a thermopile and a thermocouple?

The main difference between Thermocouple and Thermopile is their method of measurement. The thermocouple is a thermoelectric instrument, while the thermopile is an instrument that modifies thermal energy into electrical output.

How much should a plumber charge to replace a thermocouple?

Calling a professional plumber to install a new thermocouple should only be up to $150. If you do the work yourself, you will only pay the price of the part which is about $20.

Is it dangerous if the pilot light goes out?

Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.

What causes a thermocouple to go bad?

The presence of oxygen causes a reaction in the thermocouple that can wear down the part and make the wires become thinner and more brittle. Oxidation can be caused by a small amount of oxygen making its way into a sealed environment and reacting with the pure metal of the thermocouple.

How long does a thermocouple last?

10 yearsMainly, the thermocouple lasts for 10 years. But, when it fails, the pilot does not lit up and so the fireplace stops working. So, a thermocouple is an important device in the functioning of a fireplace.

Are thermocouples universal?

Universal Thermocouples. Universal thermocouples, as the name implies work on most water heaters. They are available online and in home supply stores for a reasonable cost. The length and the thread type are the two concerns when purchasing one.

Do thermocouples wear out?

Like the other component parts in your furnace, the thermocouple can wear down over time, producing lower voltage than it should when heated. And the worst part is that you can have a bad thermocouple without even knowing. Therefore, inspecting and testing your thermocouple should be part of your furnace maintenance.

What is inside a thermocouple?

A thermocouple is a sensor for measuring temperature. This sensor consists of two dissimilar metal wires, joined at one end, and connected to a thermocouple thermometer or other thermocouple-capable device at the other end.