How Much Does It Cost To Repair A Thermocouple?

Will a pilot light on a thermocouple go bad?

When the pilot goes out, this component send a signal to the gas valve to make sure that it remains closed while the pilot light is not yet lit.

This means that if the thermocouple goes bad, there is no way of detecting if the pilot light is burning or not..

Are thermocouples universal?

Universal Thermocouples. Universal thermocouples, as the name implies work on most water heaters. They are available online and in home supply stores for a reasonable cost. The length and the thread type are the two concerns when purchasing one.

How do you clean a pilot light?

How to Clean a Pilot LightCut off the gas to your furnace. … Remove the pilot light and thermocouple assembly. … Use your pliers or wrench to remove the pilot light and thermocouple from the bracket.Using the wire brush, brush away the carbon buildup and soot from both components.For hard to reach areas and stubborn buildup, use the metal file.More items…•Nov 25, 2018

Can you bypass a thermocouple?

So if you want to bypass the thermocouple you have to get rid of the spring mechanism. You can bypass the spring mechanism by simply using a screwdriver to pop out the little e-clip and take the valve off and problem solved.

What’s the difference between a thermopile and a thermocouple?

The main difference between Thermocouple and Thermopile is their method of measurement. The thermocouple is a thermoelectric instrument, while the thermopile is an instrument that modifies thermal energy into electrical output.

What does thermocouple look like?

The thermocouple looks like a piece of metal tubing smaller than a soda straw. To find it, first locate the gas control box. This is the box that the main gas line enters, where you turn the gas on in the furnace. (On most furnaces, it also houses the button that you hold open or push to relight the pilot.)

What size thermocouple do I need?

Universal thermocouples come in lengths from 15 to 36 inches. An 18 or 24 inch will suffice for all residential water heaters using universal kits. Almost all older waters heaters and many of the newer style units with a sealed burner compartment and a viewing window will use this thermocouple.

Does Home Depot sell thermocouple?

Thermocouple/Thermopile – Water Heaters – Plumbing – The Home Depot.

Why does my pilot light keeps going out?

If the pilot light goes out, the thermocouple senses the drop in temperature and signals for the gas valve to close. If you have a faulty thermocouple is the most common reason that your pilot light is malfunctioning. Over time your water heater will collect dirt, dust and other kinds of debris.

Can a thermocouple work intermittently?

Intermittent break in old thermocouple. Bending or expansion causes an open circuit. Draft condition that was corrected by the plumber (misplaced vent louvers, covers, etc.) The thermocouple measures okay, open circuit, but not under enough load to actually drive the valve.

How long does a thermocouple last?

one yearIn effect, new thermocouples were installed into contaminated tubes, causing the degradation of the sensors and generating greater than a 100°F shift in accuracy. In this scenario, thermocouple life, which should have been close to one year, was shortened to within a week.

What causes a thermocouple to go bad?

The presence of oxygen causes a reaction in the thermocouple that can wear down the part and make the wires become thinner and more brittle. Oxidation can be caused by a small amount of oxygen making its way into a sealed environment and reacting with the pure metal of the thermocouple.

Can a thermocouple be cleaned?

The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.

How do you know if you have a bad thermocouple?

If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.

Can you fix a thermocouple?

If the pilot remains lit, but the main furnace doesn’t stay lit, it’s time to replace the thermocouple. Replacement thermocouples are in stock at most hardware and home improvement stores. Because they come in different sizes, take your faulty thermocouple to the store with you so you can make a correct match.

Do thermocouples wear out?

Like the other component parts in your furnace, the thermocouple can wear down over time, producing lower voltage than it should when heated. And the worst part is that you can have a bad thermocouple without even knowing. Therefore, inspecting and testing your thermocouple should be part of your furnace maintenance.

How do you test a thermocouple with a meter?

MultiMeter Thermocouple Test Procedure First, remove the thermocouple. Secondly, turn on the meter and set it to Ohms. Touch the two leads together from the meter, and you should get a reading close to zero. With the leads apart, you will read infinity.

How much does it cost to replace a thermocouple?

The No. 1 cause of pilot lights that won’t stay lit is a worn-out thermocouple. It’s easy to replace and a new one costs $5 to $10.

How do you check a thermocouple?

Place one test lead on the side of the thermocouple and the other to the end that screws into the gas valve. If the thermocouple has proper continuity, a small resistance reading should be visible on the multimeter. Many multimeters also indicate continuity with an audio alert.